Find Silica Sand Dryer, Rotary Sand Dryer, Rotary Drum Slag Dryer on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Drying Equipment > 20tph Yellow Sand Rotary Drum Sand Drying Machine

20tph Yellow Sand Rotary Drum Sand Drying Machine

Product Description

Structure: Rotary Type Drier

Operation Pressure: Atmospheric Dryer

Appearance of Dried Sample: Bulk

Movement Way: Combined

Type of Atomization: Rotary Atomization

Application: Dry Sand, Slag, Limestone

Fuel: Gas, Oil, Coal

Dust Collector: Cyclone and Tank Dust Collector

Moisture After Drying: <0.5%

Trademark: Newwall

Specification: CE

HS Code: 8419399090

Operational Method: Continuous

Drying Medium: Air

Heating Mode: Transmission

Type of Flow: Cross Flow

Sprayer: Air-Flowing Type

Capacity: 60tph

Powder: 44kw

Moisture Before Drying: 15%

Output Temperature: 50-65

Transport Package: Seaworthy Packing

Origin: Shanghai

Three drum sand dryer

The three drum sand dryer can be applied in drying raw materials such as yellow sand, slag, clay, quartz sand etc...It's widely used in industries such as dry mortar, cement, building materials, glass, chemicals, and casting etc.

the heat efficiency of three drum sand dryer can be up to 80%. shorter length, it's easy to arrange the work site. gas burner is clean and save space.

20tph Yellow Sand Rotary Drum Sand Drying Machine

20tph Yellow Sand Rotary Drum Sand Drying Machine

20tph Yellow Sand Rotary Drum Sand Drying Machine

General description:

The dryer is assembled by three concentric-cylinders which halved joint with different diameters. Computer optimized stock

guide and lifting blade with different angles and spacing are installed inside the

cylinder, the structure can ensure that the material being dried runs along the

direction of screw under the impact of gravitation, stay sufficient time and good

dispersion in the cylinder to let the material exchange with the heat airflow from

air heating furnace inside of the cylinder. The special three-cylinder structure

makes the inner cylinder and middle cylinder being surrounded by the outer

cylinder to form a self-contained thermal insulation system, the radiated heat

from surface of inner and middle cylinder assist heat the material in the outer

cylinder, but the outer cylinder is at the low temperature end, so the heat

dissipation area and heat loss is reduced significantly.


1.Energy saving, the heat efficiency can be up to 80%,

2. Save space, just the 1/3 of single cylinder dryer.

3. Friction transmission, lower noise

4. Low dust pollution

5. The cylinder and flying plate use alloy steel, double service life than normal steel.

6. Can use coal, gas or oil as fuel.

Contact us if you need more details on Dryer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Drying Machine、Rotary Drum Slag Dryer. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Drying Equipment

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters