60tph Rotary Type Drum Dryer for Slag

Model NO.: LCH-60


Object: Slag


Drum diameter: 3200mm


Energy Saving: Energy Saving


Color: Silver


Condition: New


Capacity: 20tph


Powder: 22kw


Moisture Before Drying: 15%


Output Temperature: 50-65°c


Trademark: Newwall


Origin: Shanghai




Model: 3.2mx7.5m


Voltage: 380V


Certification: ISO9001:2008


Warranty: 5 Years


Customized: Customized


Application: Dry Sand, Slag, Limestone


Fuel: Gas, Oil, Coal or Biomass


Dust Collector: Cyclone and Tank Dust Collector


Moisture After Drying: <0.5%


Slag Size: <5mm


Specification: CE


HS Code: 8419399090



Three drum sand dryer



The three drum sand dryer can be applied in drying raw materials such as yellow sand, slag, clay, quartz sand etc...It's widely used in industries such as dry mortar, cement, building materials, glass, chemicals, and casting etc.

the heat efficiency of three drum sand dryer can be up to 80%. shorter length, it's easy to arrange the work site. gas burner is clean and save space.









General description:

The dryer is assembled by three concentric-cylinders which halved joint with different diameters. Computer optimized stock

guide and lifting blade with different angles and spacing are installed inside the

cylinder, the structure can ensure that the material being dried runs along the

direction of screw under the impact of gravitation, stay sufficient time and good

dispersion in the cylinder to let the material exchange with the heat airflow from

air heating furnace inside of the cylinder. The special three-cylinder structure

makes the inner cylinder and middle cylinder being surrounded by the outer

cylinder to form a self-contained thermal insulation system, the radiated heat

from surface of inner and middle cylinder assist heat the material in the outer

cylinder, but the outer cylinder is at the low temperature end, so the heat

dissipation area and heat loss is reduced significantly.





Advantage:

1.Energy saving, the heat efficiency can be up to 80%,

2. Save space, just the 1/3 of single cylinder dryer.

3. Friction transmission, lower noise

4. Low dust pollution

5. The cylinder and flying plate use alloy steel, double service life than normal steel.

6. Can use coal, gas or oil as fuel.

Model	Capacity(T/hour)	Power(kw)	Dimension LXWXH(mm)
LCH-15	10~15	3X4	4860X2630X2960
LCH-30	20-30	5.5X4	6330X3230X3600
LCH-40	30-40	7.5X4	6970X3410X3790
LCH-50	40-50	11X4	8120X3660X4020
LCH-60	50-60	11X4	8620X3660X4020
LCH-80	60-80	15X4	9120X3860X4220

Contact us if you need more details on Slag Dryer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Rotary Dryer、Drum Dryer. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Drying Equipment